Hello, all! Need some clarification. I have X460G2 with SS card. SummitStack card with 2 stack ports. BUT when I #run diagnostics stack-port I can see 6 ports. Running Power On Self Test...(Stack port mode) *************************************...
Hi, I am trying to do a capture on a switchport i have used different commands, but it looks like they only capture internal traffic. This command should capture packets only on port X and on Vlan X debug packet capture ports 2:3 on vlan Administr...
END to END OSPF is not coming up, Extreme Switch is working as L2 device, while taking PCAP we got, Switch is changing the 3rd OCTET of MAC address while giving it to router.
I'd like to create a simple 4 port LAG between an Extreme Switch (x460-G2) and a Brocade switch (that is already successfully setup for LACP) I've never setup a LACP LAG on EXOS before. Is there a guide for this?
Hi I am looking at ECMP on a x440 G2 switch. The x440 is connected to two seperate routers and I would like to load balance traffic across them. The manuals indicate that it is supported on the x440 G2 but you can not configure the hashing. The x440...
