ExtremeSwitching (EXOS/Switch Engine) - Page 387 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Unable to telnet to Slot on a Stack

Hi all, On my access layer switches, which are configured in stacking mode with versions 22.3.1.4 and 21.1.3.7, i am unable to telnet into slots. I am getting the following error: Slot-1 ACCESS01 # telnet slot 2 sh: can't create /dev/: Is a directo...

EXOS port statistics summary available

By customer request, created an EXOS port statistics summary display that consolidates these separate EXOS commands into one display: show ports statistics show ports rxerrors show ports txerrors show ports congestion show ports qosmonitor conge...

How to create SNMP configuration to use solarwinds Network Performance Monitor

I want to use solarwinds Network Performance Monitor to manage Extreme switches x150, x250, x450 etc. SolarWinds Community String : solarsnmp Read Only Version 2 How to create SNMP configuration on the switch? Please provide the CLI command?

SonicWall NSA to x450e to SonicPoint VLAN

Having trouble connecting SonicPoint AP to SonicWall through VLAN. I'm not proficient in managed switches and trying my best to learn as I go. Thanks for any help on this. Here is my setup: SonicWall NSA setup using X2(10.11.12.1) as primary LAN wit...

EAPS primary with ERPS subring

Hello! We have EAPS ring with 4 Extreme switches: E1-E2-E3-E4-E1. E1 is the master. 2 Huawei ERPS switches have to be connected to the original EAPS ring, forming additional ERPS ring: E2-H1-H2-E3. Should we run both ERPS and EAPS on E2 and E3? If s...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN