ExtremeSwitching (EXOS/Switch Engine) - Page 413 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Don't see macs in fdb table on x450a-24x

Hello. There is a problem with adding some random client's macs in fdb table on extreme x450a-24x firmware version 15.3.5.2. I see this macs on previous switches, clients get ip by DHCP, but when I do show fdb 11:11:11:11:11:11 - I don't see this ma...

Multicast traffic doesn't pass through the core

Hi, evebody, I have a very simple configuration where Sender is on X430 (VLAN9) and Receiver is on other X430 (VLAN26). Both X430 are connected through X670 (it's core switch). ipforwarding and ipmcfowarding is enabled on X670 for both VLANs. I go...

Summit X-Series, Problem with curent time

Hi, at all! We have a problem with some switches x450 with the firmware 22.2.1.5 and higher. We configure the timezone with this syntax: "configure timezone name MEZ 60 autodst name MESZ 60 begins every last sunday march ends every last sunday...

power supply external and internal error message

FYKI... My question is Extreme summitX440-12p switch automatically rebooted and I checked show log command i saw psu error mesage below mentioned here... 01/02/2018 07:27:26.97 External Power Supply is disconnected. 01/02/2018 07:27:26.97 Intern...

BD12804 failed to select correct routes

Good day for all!! We have two BD12804 in two sites in our network. OSPF is running between them. On Edge routers we redistribute from BGP to OSPF some equivalent routes (on first site - External Type 2 (o2) with metric 100 and on the second site - E...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN