ExtremeSwitching (EXOS/Switch Engine) - Page 420 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Stack switch fails and brings the whole LAN down

i have x440-48T Switch stacks in my Local LAN, over the last 6 months the LAN has been brought to a standstill because of a failure on a stack, both times it was a different stack. No one can connect from external the whole Network is down. We have ...

propagate vlan

We need propagate vlan over two extreme, but on first swift vlan id it's 71 and second swicht vlan 71 it's occupied for other vlan ... How can solved?

Version 22.1.1.4 default tacacs shared secrets change daily

Just started to upgrade to 22.1.1.5 and noticed that our daily archive picks up a change to the switches configuration everyday..... This seems to be caused by the shared secrets changing everyday. We are upgrading so that EMC will work for changi...

VPLS+MLAG+ISC

Hi all. Config. We have two X670 with MLAG and MPLS/VPLS enabled, some ports use MLAG. We have shared group of 4 ports for ISC link between switches, also have customer vlan V100 on both switches, vlan V100 does not added to any MLAG ports, only to...

Spanning Tree MSTP region and general STP question

Hi all, I’m getting ready to decommission some Summit x450e’s and replace them with x460-G2’s. As I’m not very familiar with MTSP or Extreme in general and I’m looking for a little assistance. My plan is to create a trunk between the new 460 stack...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN