ExtremeSwitching (EXOS/Switch Engine) - Page 425 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Transit ACL on L3 routing switch

Does anyone happen to have a transit ACL on a publicly routed ExOS switch? I'm using an X440 stack as an internet gateway for a customer. I did create an access profile for all of the management profiles only permitting certain IP ranges to gain a...

Netlogin - Dot1X and Mac authentication on the same port

I have netlogin successfully working with 802.1x and MAC-based when a single device is connected. I am now trying to combine this in the form of an Avaya handset - a port is configured with Netlogin: - tagged VLAN for voice (with MAC auth) - untagge...

XOS LLDP announce management IP

Hello, is there a way in XOS to announce a IP-address non vr-mgmt/mgmt-vlan in LLDP management address? most of my customers didn't use the out-of-band management port. In this case the lldp management-address field doesn't make any sense. I funct...

ssh module not loaded, set xmod imag as primary?

set the image as primary, actually am facing an issue with ssh "module not loaded" after i have checked the switch i found xmod image not set: # sh version images Card Partition Installation Date Version Name Branch ---------...

How to connect via ssh from router cisco

Hello All, My ISP needs connect with switches extreme by SSH from rouert cisco since we want to maintain this connection as contingency. These are logs the cisco router RTT_BF_HC_ENVIGADO_PPAL#ssh 1.1.1.1 [Connection to 10.128.35.4 aborted: e...

Top Kudoed Authors

User

Count

28

27

20

20

17

GTM-P2G8KFN