ExtremeSwitching (EXOS/Switch Engine) - Page 426 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

SSH and Web management acces of switch from LAN

Hi there, I'm new to ExtremeOS, im trying to setup SSH and Web management of an X450a-24t. I have given the mgmt vlan an ip address. And i have created a new vlan, vlan 4094 (ManagementVLAN) an ipaddress. But i cant access either from the lan. Can ...

There is no command for enable auto-provision

I want to auto configure my extreme switches. I read an article where it discribes how to use the cli command "enable auto-provision". But i cant use this command because XOS doesn't find it. Is it not any more available ? Summit X450G2-48p-G4 Soft...

New switch configuration

Hi there, I have recently bought an x450a-24t from Ebay and was wondering if somebody could point in the direction of a best practice guide to setting up a this switch? For example what stages should be done in what order, how to set switch nam...

Help writing a flow redirect acl

What I am attempting to do is to push any outbound port 80 traffic (https too but not in this example) to the internet with a flow redirect command but skip if the traffic is local. So here's what I have so far: the ** are comments for the sake of...

x460-G2 vlan high cpu load

Hello all, have Extreme-x460-G2-24x and have problem high cpu load on process vlan Mem: 494772K used, 489416K free, 0K shrd, 3820K buff, 164988K cached CPU: 50.1% usr 12.7% sys 0.0% nic 32.9% idle 0.0% io 2.1% irq 1.9% sirq Load average: 8.56...

Top Kudoed Authors

User

Count

28

26

18

18

17

GTM-P2G8KFN