ExtremeSwitching (EXOS/Switch Engine) - Page 427 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Port bounces up and down once after reboot: X670G2-48x-4q

After reboot of the switch some port are bouncing up and down one time. We don't see any reason for this and it's causing traffic loss for us. 11/16/2016 13:19:22.61 Port 49 link UP at speed 40 Gbps and full-duplex 11/16/2016 13:19:20.21 Port 1...

Working example of Link-Flap in EXOS

Just wondering if anyone has any working examples of EXOS link-flap. I'm trying to make sense of the documentation while at the same time introduce some realistic values. Here is what the documentation says: ------------------------------------------...

How to schedule commands on X430 ?

Hello, I need periodically to disable PoE on some ports to reset CCTV cameras (eventually reboot the switch). I was able to write python script, which disables inline-power and then re-enables inline-power on interesting ports. However, X430 series ...

Can I run different types of MSM modules on one 8810 or 8806 machine?

Can I run different types of MSM modules on one 8810 or 8806 machine? For example, can I run MSM-48c and MSM-96 on one machine? Can I run MSM-48c and MSM-128 on one machine? Please answer me.

Need ACL to "auto conf" AVAYA Phone

I work on a very large campus, we have a lot of avaya phones. We have a voip vlan but our data vlan allow phones to work but it is better for us if all phones are in voip vlan. How can i make one ACL to auto configure switch port when it detect a p...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN