ExtremeSwitching (EXOS/Switch Engine) - Page 430 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

LACP via MLAG config check

Hi All, First time configuring a server with LACP via two switches with MLAG configuration. Can someone just confirm this is correct? I have read the XOS guide and have not done anything extra with regards to configuring a LACP MAC or setting prio...

cli different characters/symbols which is not readable.

cli different characters/symbols which is not readable. Kindly help.Thanks

SSH and Web management acces of switch from LAN

Hi there, I'm new to ExtremeOS, im trying to setup SSH and Web management of an X450a-24t. I have given the mgmt vlan an ip address. And i have created a new vlan, vlan 4094 (ManagementVLAN) an ipaddress. But i cant access either from the lan. Can ...

There is no command for enable auto-provision

I want to auto configure my extreme switches. I read an article where it discribes how to use the cli command "enable auto-provision". But i cant use this command because XOS doesn't find it. Is it not any more available ? Summit X450G2-48p-G4 Soft...

New switch configuration

Hi there, I have recently bought an x450a-24t from Ebay and was wondering if somebody could point in the direction of a best practice guide to setting up a this switch? For example what stages should be done in what order, how to set switch nam...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN