ExtremeSwitching (EXOS/Switch Engine) - Page 439 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

ip forward-protocol from Enterasys syntax to Extreme

Hello Guy, how to translate these commands from Enterasys to Extreme 460? i haven't found the right command and no port on this so far. ip forward-protocol udp 2009 ip forward-protocol udp 3001 thanks in advance

X620 error log messages

Hello, all! Had an case 01280313 with X620 error messages. May be it can be usefull to add to GTAC knowledge base. Objective: Below error messages often appear IPv4 multicast entry not added. Hardware Group Table full. But debug hal show ipv4mc ...

EXOS specifiy source interface for sntp, download image or download url

We have a X450-G2 with 16.1.3.6. This switch is the router of a branch. Unfortunately the router-transfer nentwork is not part of VPN IPSec SA. So we have several problems with services which using the route-based source interface to reach some ser...

Firmware update question on 460's running VRRP

Hello, We have a pair of x460-G2's running VRRP and MLAG at two sites. They are currently running 16.1.3.6, and I would like to apply the current recommended firmware 16.2.2.4. This is the first time I have had to update the firmware while running...

Future Schedule a run diagnostics (XOS 460 model)

Hello, It's handy with XOS that you can schedule a reboot of a stack to happen at a certain date/time in the future. Say after hours on a certain date. Is there a way to do this for running diagnostics? Say you don't want to run during production...

Top Kudoed Authors

User

Count

28

23

17

16

16

GTM-P2G8KFN