ExtremeSwitching (EXOS/Switch Engine) - Page 440 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Bootprelay configuration

Hi We have a D series Extreme switch and would like to enable bootprelay so clients can receive their addresses from the companies DHCP server. I see the commands are (assuming just the default vlan is configured) "configure bootrelay add " "en...

ELRP messages spiking SNMP process

Yesterday I was working at a customer site installing EMC. After getting the switches setup and into EMC with SNMPV3 several of the switches 'went down'. They were still accessible, so looked and SNMP process was high. Also noticed ALOT of ELRP loo...

Chalet equivalent

I have an x450a24t running the latest firmware, thus comes with the screenplay Web interface. Is there anyway to upgrade the firmware to get the chalet Web interface or is there another alternative that can give gui/web management in this way? ...

how to lock a static ip in interface port in the switch EXOS 15.7?

how to lock a static ip in interface port in the switch EXOS 15.7?

EAPS limits - understading "spatially used"

Hi Community, we have a Summit x460 with EXOS 16 and need to build additional EAPS rings. I had a look in the release notes of EXOS 16 to check, if we reached our limit and there is stated "32 rings, but only four if the ring is spatially reused". ...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN