ExtremeSwitching (EXOS/Switch Engine) - Page 442 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Newer version of code, reboot as master capable, asks for passphrase

Hello, in this example I have x460-48p switches. I noticed that with code 16.2.2.4 patch 1-3 (was the recommended code @ extreme at the time to address the poodle vulnerability), that if we have a switch in a stack that's not the master, when I issu...

Unable to Add L2

Hi, I am getting below messages in switch log. The release which i am using on BD8806 is 15.3.3.5 patch1-4 06/20/2017 09:15:20.27 Slot-5: Unable to Add L2 5:21 to s,G,v=a9beec5,e0000012,122 IPMC 95, unit 1 Entry not found 06/20/2017 09:15:02.01...

BGP advertise-map in XOS

I have a Multi-homed Routers connected to 2 ISPs. I need to Create like an Advertise-map on the Standby Router connected to the Standby ISP to only advertise my Public address if the primary link goes down . Is there a way of doing it in XOS ? Than...

Summit X670-48x (17103)- is this switch supports both 10G optical and 1G electrical ports togather?

Hi Experts, I have a scehnario, where i need 10G optical ports and 1 G electrical ports , so question is :- --> Summit X670-48x (17103)- is this switch supports both 10G optical and 1G electrical ports?

Summit x450a-48t Infinite reboot How do I fix it?

Summit x450a-48t It will reboot continuously at boot time Extreme Networks * Summit X * Version 1.0.3.1 Branch trunk by release-manager on Fri 04/20/07 Copyright 2003-2007, Extreme Networks, Inc. Press and hold the to enter the bootstrap. Starti...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN