ExtremeSwitching (EXOS/Switch Engine) - Page 445 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Stp topology change not showing in syslog

Hi, i have my switches configured with the following: configure log filter LabFilter add events STP.SendClntTopoChgMsg configure log filter LabFilter add events STP.State.Topology configure syslog add 10.96.32.32:514 vr VR-Default local0 enable lo...

It is possible configure a passwor to "become" our try to accesse privileged mode like admin?

I want to configure my Extreme swith to use authentication from RADIUS server and after loging the user must pass another passwor to change the configuration. Is this possible?

Switch Config for routing through a Firewall (routing on a Stick)

Hi. Hope someone can help, am having a bit of a problem routing two vlans through a firewall. I've sub interfaced a nic on a FW to have two vlans attached to the physical nic. On the uplink to the interface on the FW I've configured the port to b...

BFD flap

Switch X670. BDF flapping on all peers. We enable log debug-mode for bfd. (In this log problem start at 1:50). And we can't find trigger for this behaviour.

gPTP port roles

I am using an X430-8p switch to connect two Altera Arria 10 kits running Linux PTP. I am using L2 802.1AS (gPTP) and I'm wondering how the port role assignment should work in my case. If I would like my one A10 kits to be GM, and the other one to b...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN