ExtremeSwitching (EXOS/Switch Engine) - Page 456 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Basic Policy Based ACL

Hi there, Can anyone explain to my why this basic ACL policy does not work? This is using XOS 22.2.15 on an X450-G2. I want to emulate Cisco behaviour of permitting what I want with an deny at the bottom. # Permit entry 1.1 { if { source-address 19...

Default "MAC" gateway - Trouble with provider limitation

We have a link between two stations provide by a external company.This provider have a limitation of MAC and this cause comunications problens between equipments below the switches. Is there a way to create a "defalt MAC gateway" in L2? I saw the pr...

Determining the correct level for Broadcast Rate limiting.

I’m considering enabling broadcast, multicast and unknown unicast rate limiting on a customer’s network ( core EAPs ring links ), this customer recently had a EAPs ring loop as the result of a card malfunction, this was devastating to the customer ne...

Switch BD 15.6 port peak utilzation moved to 100% only on 1 port in LACP

1 port in LACP TX utilization is reaching 100%, average traffic on both these ports are 17% average. MPGWLCTC> A 1000 4.09 100.00 8.05 100.00 --> 1:48 MPGWLCTC> A 1000 8.72 8.72 7.95 ...

What is the role of MSM in Black diamond.

What is the role of MSM in Black diamond, can we use Black diamond without msm card. If I have to upgrade Black diamond do I have to upgrade each slot individually or upgrading msm upgrades all slots. Can I failover primary msm to secondary manual...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN