ExtremeSwitching (EXOS/Switch Engine) - Page 462 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

MY BD8810 firmware hitless upgrade possible?

My BD8810 MSM-A,B firmware is 15.6.3.1-patch1-5. 16.2.2.4-patch1-3, is it possible to upgrade hitless?

rstp juniper

i have a prob to applicate rstp between extreme 480e and a juniper switch

help for stpd config

what is my mistake * Slot-1 Stack.3 # configure stpd "s0" add "vlan100" ports 1:1-6 Error: Cannot assign vlan vlan100 port 1:1 to STP domain Error: Cannot assign vlan vlan100 port 1:2 to STP domain Error: Cannot assign vlan vlan100 port 1:3 to STP...

Upgrade the X250e-48p directly from 12.0.3.16 > 15.3.5.2

Hi Community, Can l perform direct upgrade from 12.0.3.16 > 15.3.5.2? Switch BootROM: 1.0.3.5 Regards, Mykhaylo

extreme switch connected to cisco switch and losing packet

Hi All Can someone help me, I have 2 ExtremeXOS 440 switches version 21.1.1.4 connected to cisco switch 6500. Problem : when I’ doing continues ping I’m getting packet loss and when one switch responding to my pings another will not ...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN