ExtremeSwitching (EXOS/Switch Engine) - Page 463 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

LX SFP not working in shared port

Just purchased a new X440 - G2 switch and Extreme 1GB LX SFPs. I am not able to get the SFPs to work in the shared ports (using port 47/48). Is there something I need to do activate those ports to work with the SFPs? I've tried different Single M...

SSA t1068-0652 NAT

Can anyone explain how can i do nat in my SSA Switch. interface vlan.0.2 ip address 10.10.2.254 255.255.255.0 primary ip nat inside no shutdown exit interface vlan.0.10 ip address 44.44.150.13 255.255.255.224 primary ip nat outside no...

XOS MIBs in seperatet Files

Hello Community, we have got a Problem regarding the XOS-MIBs. All XOS-MIBs are just packed in 1 File. The Problem we face, we can't import the XOS-MIB-File in our Monitoring-System, because the Monitoring-System only supports 1 MIB per File. Is t...

Fiber Channel Over Ethernet(FCoE) support on x620

Is the Fiber Channel Over Ethernet(FCoE) supported on X620 platform. I have found only some old (2 years ago) answers when there wasn’t x620. I have also found some configuration which suggest that it is supported: http://documentation.extremen...

Maximum power consumption of 440-48p g2 vs 450-48p g2 Typo?

Looking at the spec sheets for x440 g2 and x450 g2 and the sheet lists a max power usage of a 440-48p g2 10ge as 961watts, a similar equipped x450 is listed as 228 watts. Can anyone from Extreme verify how the x440 spec sheet is figured? or if ...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN