ExtremeSwitching (EXOS/Switch Engine) - Page 470 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Password not working after applying configure failsafe admin permit all command

Initially I configured admin password and it was working fine on x460 switch. As soon as I applied configure failsafe admin permit all command, password is no more working....?

Can't seem to get Vlan 1 (default) to trunk traffic through

I've been beating my head against this for a while since I've only encountered this issue with our Extreme switches and none of our other brands. For the life of me, I cannot get traffic to move through on the default vlan from our other switch...

Port mirror to ESXi Virtual Machine

Hi, When configuring a port mirror to and from ESXi virtual machines for passive call recording we can see some mirrored traffic but cannot see any RTP traffic. The virtual machines are on separate VMware vSwtiches to force the traffic throug...

Rate limit flood counters

Hi all, I have set on my switches the rate limit for broadcast and multicast traffic to 1000 pps, i can see the Flood Rate Exceeded counter incrementing when i type the command "show port rate-limit flood refresh port-number", the configuration is a...

X450e-48p routing all multicast traffic to other switch

Hello, I've all my devices running on switch1 X450e-48p "ExtremeXOS version 12.5.4.5" switch. All of its ports are filled when i added another switch (switch 2) with same os and model behind switch 1 all the multicast traffic from switch 1 to switch...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN