ExtremeSwitching (EXOS/Switch Engine) - Page 48 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Is loopback interfaces required for ospf?

In Cisco world, you want to create a loopback IP address and advertise it in OSPF. It's a virtual interface thats never down.In EXOS however, it's a little different. Vlan1 for example, isn't "down" if there are no active ports in it. Is it still ...

Resolved! Do you need a default route with flow-redirect?

When using flow redirect do I still need a default route or will that interfere with flow redirect?Should I havecreate flow-redirect BACKUP-INETconfigure flow-redirect BACKUP-INET add nexthop 10.10.5.1 priority 150configure flow-redirect BACKUP-INET ...

DHCP Helper or Relay

Hi all,I had some trouble to call dhcp server in X620-16x-FB that act as Core Switch. This site before, used HP3com for core switch. After convert the config into Extreme format, i failed to call dhcp server (dedicated one) for other vlan but its w...

Resolved! Unused Ports for Aerohive and Extreme Switches in ExtremeCloudIQ

I know in Cisco switches I can pull state changes and get a date for the last time a port was active, but for the life of me I cannot find that option on our Aerohive branded switches, Extreme branded switches, or within ExtremeCloud IQ. Do you know...

Resolved! X590 - MLAG - best practice for ISC

Hallo Community,I wish you all a happy new year.We have two X590s and want to configure them with MLAG. A QSFP28 port (here QSFP28_1) is planned for each X590 for the uplinks to the core switch.We have several options for the ISC connection between t...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN