acl configuration
Hi i want to configure dynamic ACL in Exos to allow one way traffic and should incoming traffic can any one help
Hi i want to configure dynamic ACL in Exos to allow one way traffic and should incoming traffic can any one help
I couldn't find any information for this specific situation so thought I would write it up in case anyone else hits it.We attempted to use the 10GBASE-T ports on the back of a X440G2-48p-10G4 switch. Slot 2 in this case. With stacking in use on por...
Hi,We are working on an automation project the polls the switches periodically and would like to extract the MAC address of connected devices to the switch and what ports they are connected to. The result of 'show fdb ports 1:1-1:48' is basically wha...
I have a site that “Default” vlan is vlan 1 on a 3 switch stack (48 port poe 5520). Is it possible to change this globally to another number such as vlan 33 for example, without an outage?if doing so would the ip address and ospf definitions remain?I...
I am finding it difficult to locate mac addresses for PC's and Printers when they are not assigned to a particular VLAN. When I run the cmd show fdp (mac address), nothing shows. I have deleted all ports from the default vlan. I do have the ports on ...
User | Count |
---|---|
28 | |
26 | |
20 | |
20 | |
17 |