ExtremeSwitching (EXOS/Switch Engine) - Page 513 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Can SNMPv3 be configured to use radius for the authentication on EXOS?

We're looking to implement SNMPv3 across many clients and at the same time, move our MSP management accounts to a cloud-based RADIUS platform. Is it possible to use RADIUS for the authentication of an SNMPv3 agent?

Configure port to allow/forward and tag all VLANs configured in the switch

Hi all! It's a bit hard to explain as I am not a switch expert, but I am trying to give a description below. If anything is unclear, please let me know and I will try and provide more/different information. I have several switches (X440's), and I h...

Show size of MTU EXOS

I can find all the commands for configuring jumbo frames and MTU in EXOS but I can't find the commands to show existing (currently default) MTU. I can only search the config and see jumbo enabled on a port. (show config detail does not work either)...

Is there a possibility to see the inactivity duration from a Switch Port in Netsight for XOS Switches

In Ridgline we had an report called inacitive ports or similar. Does this feature exists in Netsight to?

X440-G2 10GB Uplink - bad snare if you miss 10GB LIC

Today we have a very painful and time-killing problem. Be careful NOT to run into the same issue. We using X440-G2 with 10GB GBICs on the Uplink ports (51-52 - with Dual 10GB LIC) linked to 2x X670-G2 also with 10GB GBICs. Some of my collegues conf...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN