ExtremeSwitching (EXOS/Switch Engine) - Page 522 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

EXOS DHCP Address Limit

We have sometimes problems with SecureStack (B5) as local DHCP server (at branches). As is i learned today in the GTAC KB: SecureStack Stops Providing DHCP Addresses There is a limit of 256 IPs per Switch ! (not per VLAN) This can explain my probl...

isolate ip network of vlan from other on same port

Here is the scenario we have multiple VLAN's configured as follows. VLAN 2001 setting create vlan "vlan2001" configure vlan vlan2001 tag 2001 configure vlan vlan2001 add ports 21-24 tagged configure vlan vlan2001 ipaddress 10.0.0.1 255.255.255.0 c...

save current config in a file in extreme switch

we have summit X460-24t switch usually I telnet to it and run show config log the contents of telnet session to a file The problem is when screen fills up I get 'press space to continue or q to quit' , then I have to press space . Is there a bette...

Default route not coming out of routing table in NSSA when link down

Hi, I have a problem with a re-distrubuted static route which I think I have nailed down to being a problem with the NSSA setting on the remote area. We have the following topology; There are point to point links between the CORE and WAN and also...

Export direct and static to one bgp neighbor

Is there any way to only export direct and/or static to a specific neighboor ? I can't figure out if I can do it in a route-policy or not ? I do not want to do it for the general bgp process. ( I would have to rewrite alot of export policys then ) ...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN