ExtremeSwitching (EXOS/Switch Engine) - Page 536 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

IPV4 interfaces, GRE capacity, PIM flow capacity, QOS level 3 and 4, flash memory on X440 G2

Hi all, I have to fill those questions regarding X440 G2 features (X440-G2-12p-10GE4, X440-G2-24p-10GE4 and X440-G2-48p-10GE4). I went throw the documentation below: EXOS_User_Guide_21_1 ExtremeSwitching-X440-G2-DS ExtremeXOS_21.1.1-Patch1-5_RelNo...

Will the switch change the DSCP value in Layer 3 forwarding by default? Thanks!

Switch configured vrrp for hosts, and hosts send traffic with DSCP. By default, when switch forwarding the traffic to network, how the DSCP with tag, the original one or change to 0? Thanks!

summitX-21.1.1.4-patch1-5.xos automatic disable all_cast flood

Hi, when I'm configuring rate limit on a port, xos automatically disable all_cast on that port. I've to manually re-enable it with: enable flooding all_cast ports 1 It seems patch1-2 known issue Regards

Help with DHCP issue on x460 stack(s) in relation to wireless on AP6511 units

Inherited a network with two stacks of Extreme 460 switches. One stack in MDF, one stack in IDF. Attached to these are ap6511 wireless access points with two wireless lans setup. Domain and Guest. Domain for both wired and wireless use on...

Lost 10GB port on BD8810

I have an 8 port 10GB module in my BD8810 and I seem to have lost a port. Port 1:2 is a master port of a LAG with port 1:8 to my data center. I have changed out SFP modules and the port will not become active and is constantly flapping filling up my ...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN