ExtremeSwitching (EXOS/Switch Engine) - Page 537 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Edge switch (Extreme Summit X440) I can ping devices on a specific VLAN but when I am on a different VLAN I cannot.

I have one switch that I cannot ping devices on a specific VLAN from other devices other than from a switch. If I try from my pc or any other pc, they cannot be pinged.

Booting after System Failure

Hi Guys, Had an unexpected switch reboot. Checking the logs cannot find any particular reason. Any ideas? ExtremeXOS 15.5.3.4 patch1-5 16-08-2016 08:37:44 System is stable. Change to warm reset mode 16-08-2016 08:37:44 Policy:bind:edge-ports-pol...

IPV4 interfaces, GRE capacity, PIM flow capacity, QOS level 3 and 4, flash memory on X440 G2

Hi all, I have to fill those questions regarding X440 G2 features (X440-G2-12p-10GE4, X440-G2-24p-10GE4 and X440-G2-48p-10GE4). I went throw the documentation below: EXOS_User_Guide_21_1 ExtremeSwitching-X440-G2-DS ExtremeXOS_21.1.1-Patch1-5_RelNo...

Will the switch change the DSCP value in Layer 3 forwarding by default? Thanks!

Switch configured vrrp for hosts, and hosts send traffic with DSCP. By default, when switch forwarding the traffic to network, how the DSCP with tag, the original one or change to 0? Thanks!

summitX-21.1.1.4-patch1-5.xos automatic disable all_cast flood

Hi, when I'm configuring rate limit on a port, xos automatically disable all_cast on that port. I've to manually re-enable it with: enable flooding all_cast ports 1 It seems patch1-2 known issue Regards

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN