ExtremeSwitching (EXOS/Switch Engine)
Questions and discussions about EXOS
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Syslog Facilities

I am configuring syslog on an X440G2. I don't understand what facilities are. From what I understand, they are different levels of information such as Errors, Critical, Warning, Informative. But I can't find any documentation that says what each loca...

Problems with connectivity on VLAN mgmt

Hello,i have an extreme switch x440-g2. i try to put an ip in the mgmt vlan, but after doing that, switch does not ping. After i enabled dhcp, and i have communications by the default vlan. I need to set an specific ip for Mgmt, and i cant do that. ...

tunfas by New Contributor
  • 3584 Views
  • 10 replies
  • 0 kudos

extreme networks x440g2 -

Please help me! Hello. I tried to put in mgmt an static ip for this switch, but i never get a link. I remove ip from mgmt and i get ip from dhcp. Can someone help me how to solve this. This is how i put the ip #Configure vlan "mgmt" ipaddress xx.xx.x...

tunfas by New Contributor
  • 932 Views
  • 2 replies
  • 0 kudos

Resolved! show ports configuration

We are facing issue with CLI while issue the command “show ports configuration”. The cursor moves from top to bottom randomly and does not display the remaining ports/lines properly. Please note that this issue is with all switches we have. Seems t...

What's new in EXOS 16.2.1?

ExtremeXOS 16.2.1 was released recently and I wanted to share some information about the new features and functionality included. It runs on the following platforms — X430, X440, X450-G2, X460, X460-G2, X670, X670-G2, X770, BD8K, and BDX8. The list...

Drew_C by Valued Contributor III
  • 595 Views
  • 0 replies
  • 0 kudos
GTM-P2G8KFN