Hi, when I'm configuring rate limit on a port, xos automatically disable all_cast on that port. I've to manually re-enable it with: enable flooding all_cast ports 1 It seems patch1-2 known issue Regards
Inherited a network with two stacks of Extreme 460 switches. One stack in MDF, one stack in IDF. Attached to these are ap6511 wireless access points with two wireless lans setup. Domain and Guest. Domain for both wired and wireless use on...
I have an 8 port 10GB module in my BD8810 and I seem to have lost a port. Port 1:2 is a master port of a LAG with port 1:8 to my data center. I have changed out SFP modules and the port will not become active and is constantly flapping filling up my ...
A customer reported a lack of connectivity to one of their closets. We saw link, and EDP on both ends of the link but the devices could not ping each other. We moved the link to slot 1 of the 2 slot X670G2-48x-4q stack and were immediately able to pi...
Model: Summit X460 Software version: 16.1 With the "rate-limit flood broadcast 500 out-actions log disable-port" configured. When a flood rate is exceeded. Is there another way to enable a port with a "Out of profile" status other than enter the ...
