ExtremeSwitching (EXOS/Switch Engine) - Page 542 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

How do you remove VRRP from a pair of BD8806s?

Hello guys, I hope you are all doing well! We have a set of BD8806 chassis switches that are currently running VRRP. I didn't set this up, it was way before my time. However, I'm tasked with removing VRRP from both switches because we are not goin...

Sammit x670 problem with indicate of alarm for fans in slot 1 - but works propely

sammit x670-48V On the front pannel I can see the allarm for fans 1-3 07/29/2016 08:36:14.83 Switch, Code 5: Air flow mismatch detected in slot 1. Ensure all fantray and psu models are of similar air flow. (X670-48x, P/N: 800400-00-11, S/N: 1341N-4...

summit x670-48 erps rings in differ ports

Hello. the problem is that We cant make the second erps ringconfigure erps Ring-2 add control vlan v30 configure erps Ring-2 ring-port east 1:5 configure erps Ring-2 ring-port west 2:5 configure erps Ring-2 protection-port 2:5 enable erps Ring-2 conf...

Is there any similar feature like cisco IP event damping on extreme switch?

Hello experts, May I know if there is any similar feature like cisco IP event damping on extreme switch? http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/s_ipevdp.html

Meaning of "Show ipArp" output.

Much appreciate if somebody would please explain the meaning (function) of the following: Locktime Retransmit Time Reachable Time Are these parameters configurable?

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN