ExtremeSwitching (EXOS/Switch Engine) - Page 582 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

CNP vs CEP

I am trying to do a very simple setup. we have one provider connecting to our Carrier Ethernet Metro. provider is sending me with 3 VLAN which i usually take them inside one vman ( port is configured untag) and take it through our Metro. now what...

Black Diamond 8810 EXOS upgrade

Hello All, We wish to upgrade our Black Diamond 8810 Core switches from BootROM: 1.0.4.0 IMG: 15.3.1.4 v1531b4 to BootROM: 1.0.4.5 IMG: 15.5.4.2 v1554b2-patch1-5. Is this EXOS code going to be supported after an upgrade and/or do we need to go to a ...

How to configure EAPS primary or secondary port, if this port belong to a LAG?

Hi, I'm doing a test lab, and I want to make a LAG to participate ein a EAPS domain and I noticed that you can put many ports as primary or secondary, so I was wondering if I have to put all the ports that belong to the LAG or I only put the master ...

(pending-AAA) disable

what is (pending-AAA)...? is it possible to disable (Pending-AAA) in extreme switches...? if yes plz give configuration...! if not so plz give detail reason...!

How would I use filezilla ftp server to upgrade my switches?

How would I use filezilla ftp server to upgrade my switches. Does the extreme switch has a log on that is needs to make a handshake.

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN