ExtremeSwitching (EXOS/Switch Engine) - Page 583 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

EXOS 16.1.1 supports VLAN IDs (VID)s

Did you know ... In EXOS 16.1.1, over 50 VLAN commands were enhanced to support VID lists/ranges to simplify configuration. E.g. create vlan 10-20 Creates VLANs with the VIDs 10,11,12 etc... EXOS still uses VLAN names internally so the VLAN names ar...

Password Recovery

I need make a password recovery in Switch Summit X440-48P I can ́t in to BootStrap, the switch did not give me the option. Just give me option BootRom

How to check connected SFP module Serial no. Part No. type and Info?

How to check connected SFP module Serial no. Part No. type and Info? Apart from these command? I tried these command but can't grab required info. debug hal show optic-info slot 1 show ports 1:25 transceiver information detail sh ports 2:25 i...

self port mac address

Hi On extreme SummitX 460-48 how do we see MAC address of self port ? I mean there is one switch mac address ( some vendor call as backplane mac ) which we can see in sh switch etc . Addition to this ; there should be a MAC for each of 48 ports .. ...

elrp compatibility with Alcatel Iphones 4018/4028

Hi, I've just one question about Elrp with Alcatel iphones because we have a strange result by implementing elrp. With the 4018 model, no problem we have logs and port disabled but with an other model 4028, the port is only put in down without this ...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN