ExtremeSwitching (EXOS/Switch Engine) - Page 589 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Extreme x460 10g Modules show not supported on ver 15.7.1.4

Extreme 460 with 18 10 G SFP Ports and 8 copper ports. in SFP port when we intersert 10G Module mu lick does not comes u. When i insert 10g module in port 5 and 10 and interconnect lights power on. what can be the issue

how can i enable gui in X460 r X440

how can i enable GUI in X440 X460....i m creating vlan and give ip and enable web hhtp..but not open gui interface...? plz guide me...this is my code create vlan name configuration vlan name tag name configuration vlan name ipaddress 192.168.1.225 2...

How to do Port Specific VLAN + Routing

I need to configure routing between two VLANs with the same Port Specific VLAN, something like this: (SwitchA)10.1.1.1-------tag 100------10.1.1.2(SwitchC)192.168.1.2-----tag 100------192.168.1.1(SwitchB) How can I do this? Here is the options tha...

Changing VC Type on VPLS

How can be changed VC Type from VC Type: Ethernet (0x0005) to VLAN (0x0004) for one VPLS connection? What feature is the same as Cisco "pseudowire-class"?

Any implication using ACL to classify ALL traffic?

Been given a requirement to implement a QoS configuration that I will be prioritising Voice and Video via an ACL on certain ports numbers. My query is that I would then use a permit all on all remaining traffic to mark it with CS1 (DSCP  and then p...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN