ExtremeSwitching (EXOS/Switch Engine) - Page 600 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Problem connecting PCs to X440

my problem is that ,when i connect the switch(summit x440) with pc's the switch is not working but the lights of all ports are green.... Note: This conversation was created from a reply on: Switch x440t extreme problem with ports.

Downgrade Firmware Version XOS over switch x440

I need to make a greater Downgrade to a smaller version on a switch extreme x440 , what is the procedure? Keep in mind that the version I want to get the just installed because of an error and should give isntalarla because I have not even restarting...

Error External Table Tuning Failed(-51) from HAL on CardExec INIT(5)

Card 8900-G48X-xl failing with "Error External Table Tuning Failed(-51) from HAL on CardExec INIT(5)." I am running version 12.5.4.5 on the MSM (MSM-48C) so the card should be happy with it at least I believe that it should be. I have swapped out...

SSH access stops working

The switch was originally setup with SSH and Telnet access. After some undetermined amount of time SSH stops working. I need to disable Telnet for security reasons but am afraid to do so. If the SSH stops working I don't have any other way to remo...

Can I increase MTU size on a VLAN without an IP interface

I need to increase the MTU size on one VLAN, but the VLAN does not have an IP interface. The customer is using a /30 network, so before I tell him to reconfigure I want to check? I get an error stating "VLAN 'VLAN NAME' has no IP Interface" Summit...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN