ExtremeSwitching (EXOS/Switch Engine) - Page 601 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Error External Table Tuning Failed(-51) from HAL on CardExec INIT(5)

Card 8900-G48X-xl failing with "Error External Table Tuning Failed(-51) from HAL on CardExec INIT(5)." I am running version 12.5.4.5 on the MSM (MSM-48C) so the card should be happy with it at least I believe that it should be. I have swapped out...

SSH access stops working

The switch was originally setup with SSH and Telnet access. After some undetermined amount of time SSH stops working. I need to disable Telnet for security reasons but am afraid to do so. If the SSH stops working I don't have any other way to remo...

Can I increase MTU size on a VLAN without an IP interface

I need to increase the MTU size on one VLAN, but the VLAN does not have an IP interface. The customer is using a /30 network, so before I tell him to reconfigure I want to check? I get an error stating "VLAN 'VLAN NAME' has no IP Interface" Summit...

Not all packets are forwarded

When I enable port mirroring on our Extreme Summit x460-24t not all the packets are sent to the mirror destination port. In a wireshark capture from the mirror port I only see very few (less than 1% of the actual) audio packets (ieee1722.cdfield == 0...

Can't download the ssh module. Information writes Invalid or Profile Does Not Exist

Can't download the ssh module. Information writes Invalid or Profile Does Not Exist. Although the profile is. What to do not know. Please help. (x430-24p ) Firmware 15.5.2.1

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN