ExtremeSwitching (EXOS/Switch Engine) - Page 603 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

I need Edit the ACL policy in EXOS

I cant edit the ACL policy. i need add others IP´s direction Slot-2 SW.1 # sh policy Regla_acceso Policies at Policy Server: Policy: Regla_acceso entry bLoqueo_SSH { if match any { source-address 10.170.x.x/32 ; source-address 10.170.d.d/32 ...

PVLAN configuration uncertainty with overlapping ports

Hello, I have an existing private vlan configuration that looks like this: vlan2 (untagged) +--------------port 1--------------+ | | | | +---port 2----------------port 3---+...

Port Security on x450e

I have several x450e switches being used as access switches for phones, clients and a few Wifi APs. I would like to tighten security on these switches, I've done the standard RADIUS AAA, disabled telnet and http and only allow access by AD group via ...

VMAN + ACL

Hello! Have scheme: Cisco (vman tag) -> (port24 vman tag) Extreme X440 ( port 23 vman untag) -> CheckPoint BUT CheckPoint work in passive mode (only receive traffic), also I can't see MAC of CheckPoint, so traffic don't go to port 23 (X440 don't kn...

connectivity problems

when i installed switch summit X460 ,and wires connected to ports, connection is not done and network is not working.....switch is in a flat network,...!

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN