Trying to configure QinQ solution between two extreme switches and im facing an issue when trying to make one of the ports untagged: | Error: 8: Port cannot belong to VLAN and a VMAN at the same time.| This port is not configured in any VLAN or VMA...
We are an AV Integrator and are in the process of installing (4) Summit switches. They will need to carry AVB audio as well as some control data, Dante audio, etc. Rather than attempt to learn how to configure these switches, we would like to pay s...
Hi all, This issue began on 3/28, then recurred on 3/31, 4/1, 4/2, 4/3, & 4/4. I have a Summit x450e-48p (FW:12.6.3.2) in slot 1 of a stack that reboots (only the one switch, the others remain fine) every morning at 6:07am, the Event Log from Scre...
Trying to set up vman across an ISP supplied network ( Cisco ) L2 connectivity . ICMP is not barred .. The vman vlan has been given an IP address 192.168.200.200 ( A end ) 192.168.200.100 ( B END ) with the Cisco ISP network in between In the IPA...
I'm enabling remote mirroring, an LACP port sharing. When applying the command: enable sharing 22 grouping 22, 24 algorithm address-based L2 lacp configure mirror to port 22 remote-tag 1000 configure mirror add port 23 ingress-and-egress enable mir...
