ExtremeSwitching (EXOS/Switch Engine) - Page 608 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

multiple RP sources in one X460

I have a 460 with pim sparse to a external RP off my network. I pull 324 multicast via this sparse vlan. the rest of my network is currently dense, working as it is , I want to convert my entire network from dense to all sparse. which will cause me...

About Mirroring

Hello. I would ask about mirroring. When receiving (ingress) port mirroring, I can not see the VLAN-ID. When sending (egress) port mirroring. I can see the vlan-id. I would like to know how the mirroring process. After vlan Decapsulation? befor...

Igmp snoop timers

Hello community, I have a doubt about the igmp snoop time. I'm using the extreme X350 with a IP QAM Harmonic who doesn't send the igmp query frequently causing the IGMP group to drop. There's why I incresead the time of igmp, using configure igmp sn...

esvt between X460 & X670

Hi, I was testing the esvt traffic-test in our Lab with a Summit X460 and a Summit X670 and ran in an issue XOS Version: XOS-16.1.2-Patch1-4: When I run the test from the X460 to the X670 with a 10 G SFP (SR) and the rate of 10 Gbps on Port 49 the t...

Stacking time different on slot 2

Hi, We have three switches in a stack, slot 1, slot 2 and slot 3. The time is the same on slot 1 and slot 3 if a telnet to slot 1 and slot 3 and show switch. But if I telnet to slot 2 and do a show switch the time is different and there is no time z...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN