ExtremeSwitching (EXOS/Switch Engine) - Page 621 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

LLDP configuration for Polycom CX600 (lync edition) with XOS 15.6.3.1

I was having a bear of a time getting our Polycom CX600 phones working with LLDP on our extreme switches, as the Vendor Specific DSCP tag 46 seems to be ignored by Lync Edition phones. Switches are X460-48P and X450-48P-G2 switches. LLDP conf...

Issue with exact 50% icmp ping loss

Hi Gens, facing issue with Extreme switches X460 . As when i am pinging the other node onm vip from the extreme l3 switch getting the ping response with every alternate ping loss like below 64 bytes from x.x.x.x: icmp_seq=0 ttl=64 time=1.195 ms 64 ...

can not telnet from one switch to an other!

I can ping to my connected switch but can not telnet the switch. * Extreme_Demo_Switch-3.4 # ping 192.168.10.16Ping(ICMP) 192.168.10.16: 4 packets, 8 data bytes, interval 1 second(s). 16 bytes from 192.168.10.16: icmp_seq=0 ttl=64 time=2.243 ms 16 ...

Stacking/Connecting x440-24 and x440-48

Hi, I'm new to the Extreme range of devices and would like to ask for some advice on connecting 2 switches, 1 x440-48p and 1 x440-24p. What are my options on the above? Can I use the RJ45 ports as an uplink or must I use the copper/fibre ports on ...

Huge Boot Time on BD8800

Hi everybody, We have some problems about our new BD88K boot time ≈ 40 min We have 29 policys (1000 ACLs) on production, however with the same configuration on our previous BD10K, the boot time lasted 5 min. We have the same problem with these ver...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN