ExtremeSwitching (EXOS/Switch Engine) - Page 622 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

can not telnet from one switch to an other!

I can ping to my connected switch but can not telnet the switch. * Extreme_Demo_Switch-3.4 # ping 192.168.10.16Ping(ICMP) 192.168.10.16: 4 packets, 8 data bytes, interval 1 second(s). 16 bytes from 192.168.10.16: icmp_seq=0 ttl=64 time=2.243 ms 16 ...

Stacking/Connecting x440-24 and x440-48

Hi, I'm new to the Extreme range of devices and would like to ask for some advice on connecting 2 switches, 1 x440-48p and 1 x440-24p. What are my options on the above? Can I use the RJ45 ports as an uplink or must I use the copper/fibre ports on ...

Huge Boot Time on BD8800

Hi everybody, We have some problems about our new BD88K boot time ≈ 40 min We have 29 policys (1000 ACLs) on production, however with the same configuration on our previous BD10K, the boot time lasted 5 min. We have the same problem with these ver...

Summit switch show all vlans associated with one port

We've got a Summit 460-48. I have several ports that are associated with multiple tagged vlans as they provide switch to switch connectivity. If I issue a "show port 47", all we see is that there are [6] vlans but no further identification. I have ...

Mpls implicit null

Hello everyone, I've been trying the mpls under Extreme x460 on my lab, but after the mpls establihed neighbourhood the switch is able to announce labels, but when it received label from other router(cisco, mikrotik) it is re-label as impnull. I'v...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN