ExtremeSwitching (EXOS/Switch Engine) - Page 634 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

I am planning to connect X770-32q with X460G2-48t-10G4.

I am planning to connect X770-32q with X460G2-48t-10G4. Configured port 97 as 1x40GB then connected fiber in 97 port of X770 and connected the other end fiber in X460G2 at port 54. But when i enable the link it doesn't come up on X460G2 switch. There...

Can we use 10052H 1000BASE-LX SFP, HI Module with Multimode Fiber?

Can we use 10052H 1000BASE-LX SFP, HI Module with Multimode Fiber?

What is the Command in XOS to know Optical TX & RX Power statistics for SFP GBIC Module online/live?

Command to know Optical TX & RX Power statistics for SFP GBIC Module online/live in XOS switches.

Meter - ACL - Policy : "rate-limit" Protocol based traffic ? eg. port 80

Good day all, Need some advice if you may - I have an X440 and I would like to create ACLs that limit certain protocol ports, like port 80 (http). Please check my config below: vlan 2 created ports 1-10 added to vlan 2 untagged meter created: "cr...

Need 2 untagged vlans on one port.

I have an wireless access point that has 2 different VLANs. One for secured wireless and one for public. In setting this up, I need to configure an port that will allow 2 untagged VLANs on one port. On my 3com switch, I did this with using an hyb...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN