ExtremeSwitching (EXOS/Switch Engine) - Page 662 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Issue with the 1200DC power supply in 8806 blackdiamond

Hi Experts , We are getting the below error in one of the attached DC power supply in the 8806 chassis MSM-B: Output current conversion not available for PSU (Part name 2350 rev 5.0) for 48 V sensor in slot 3 due to Part name not recognized. Se...

Summit ACL based QoS remarking issue

Dear Experts, I found if I define the remarking command first and then define a new ACL, then the new defined ACL will follow that remarking action and use the newly defined remarking value for outgoing traffic; Yet, once I changed the rem...

LAG with 1G and 10G ports

I'm running EAPS-ring with 2 x 1G LAG-ports and now I need to add 10G ports to EAPS. How does traffic behaves if LAG has 1G and 10G ports? How about is it possible to change the LAG master-port? I have X460 switches with XOS 15.3.1.4

Default TCP TTL for X450e-48p

Default TCP TTL for X450e-48p

New Switch show "software update required"?

Hi All, We bought several switches in one case. But some of them show "software update required" in prompt, others are not with the same firmware version. Update firmware take about 30 minutes... How do I hide the message int prompt? Thank for your...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN