Hi All,
Is it possible to give source while doing ssh from Extreme switch to some external node.
Like we give source using from in traceroute or ping.
Thanks
Aggrigation L3_L4 lacp Not working when we confgure aggrigation . Load sharing is not happening seams some algo issue please suggest
When we add 3 ports in aggregation traffic on master ports not happening
One X460G2-48t-10G4 switch with 15.6.1.4 took reboot due to below errors:
10/07/2015 05:39:01.88 Booting after System Failure.
10/07/2015 05:39:01.74 Changing to watchdog warm reset mode
10/07/2015 05:38:09.20 CPU 1: soft watchdog expiration warn...
Summit 670 resets when we have a power outage. The device has two power supplies. Both of which are plugged in to separate UPS's. The logging on the UPS shows that that voltage levels never dropped below 118vac and the load on the UPS was constant. ...
Should I configure ELRP on ports that have been setup with LACP? I have 2 Summit switches with MLAG, and ports 48 on each switch are set for LACP. A server will have a connection to each port. Or will ELRP disable the port by default.
