ExtremeSwitching (EXOS/Switch Engine) - Page 666 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Cooler / Fan replacement form Summit x350 48T

Hi all, My x350 48T show a problem with a cooler/fan number 7, this cooler is very very noise and show many messages in the log alternating between OPERATIONAL and FAILED. 07/26/2015 21:06:55.92 Switch, Error 5: Fan #7 operational. Rpm 1000 is bac...

AVB over Fiber

Hello. I have 2 x Summit X440-24P switches with a 10053-PRO installed in each and connected to fiber. One switch has 3 x AVB devices connected. The other switch had 1 x AVB device connected. Both devices have AVB enabled on all ports. I can ping devi...

Any way to perform probing on a logical address to drive a route change?

Good afternoon. I have a client who just installed a 1GB L2 connection between two offices. The firewall which routes between sites cannot keep up with the rate of the circuit so we want to make the switch the default gateway on each end and use it...

Is Fibre Channel Over Ethernet supported on extreme Summit Switches , if it is how is it configured.

I am looking to confirm that extreme hardware ( Summit Xseries )support FCoE. If so what is it called in "Extreme speak " and how specifically is it configured,.

STP mode or default, whats the difference?

Hi there, Working on a site that has adopted an odd configuration for spanning-tree that I'm trying to make sense of. The below is an edited example taken from an edge switch. The network consists of all extreme devices. Its seems as though PVST+ h...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN