ExtremeSwitching (EXOS/Switch Engine) - Page 668 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

DHCP Client IP Address Loss on Stack Failover

I have a configuration where I have a set of two stacked X440-48t switches (4 physical switches, 2 sets of 2-stacks). SW1 and SW2 I have a DHCP server connected to SW1 port 1:1 SW1 port 1:48 <-> SW2 port 1:48 SW1 port 2:48 <-> SW2 port 2:48 Here'...

x670 ideal operating temperature (stack with x460)

Hi community, I have X670G2-48x-4q and X460G2-48t-G4 (version 16.1.1.4) switches stacked with each other. When i have looked up its 'show temperature output is like that : -> show temperature Field Replaceable Units Temp (C) Sta...

Netsight can not poll from switch behind firewall

I am using default SNMP setting, for local switch everything is going well but for remote site I can discover all switches using SNMP default setting but I can not poll any information. the connection between netsight and switches is over VPN and al...

Unpack .exe firmware XOS file

Hi, I have downloaded the firmware for a summit X430 and x440 and both are .exe files. I tried to uncompress with "standard" compressions tools but doesn't works, what kind of files are ? Thanks.

MLAG ports with a Untagged VLAN - Loop

Hi, Just would like to understand if you have an un-tagged vlan for example vlan default on your mlag ports on both switches will this create a loop."Yes vlan default is also on the ISC port between the switchs" Would this be like joying to access...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN