ExtremeSwitching (EXOS/Switch Engine) - Page 676 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

X460-48p - Second PSU does not fit?

Hi, We are trying to figure this problem out with our supplier, but maybe some of you bumped in the same issue. Basically we have 2 x460-48p with the second PSU. Now, there is a tiny piece of metal that sticks out from the first psu to the second ...

How to configure two vlan in one switch to communicate without using the tagging port

Hi Guys, I want to know it is possible to configure two vlan in one switch to communicate without using the tagging port?

BD 8900-MSM128 console connection

Hi All, I am trying to access to 8900-MSM128 module using console port. This console port is COM not RJ45 port. I am using 2 adapters that shipped normally with switches from both sides (module side and my laptop side) I tried all the option using...

EXOS and Cisco VoIP phones with user/laptop behind

Hi. We have a customer that uses Cisco IP phones on their corporate network and we have been approached to present a switching solution for their access layer. While I do know that with EXOS we can create a UPM profile to detect the Cisco IP phone ...

configuration changes alert

Is it possible in extreme switch using ridgeline every time we change the configuration it will send an alert or through email?thanks

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN