ExtremeSwitching (EXOS/Switch Engine) - Page 675 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

how to check / find out the root cause of Link down on SFP Fiber Link

How to check / find out the root cause of Link down on SFP Fiber Link Fiber cable error ? SFP module error ? Why was the Link down? The link is sharing port. LACP L2 (1:21 and 2:21) Now the link is up and running. I didn't see any collisions/...

Tunneling CDP frames

Best solutions out there to tunnel CDP in a mixed Extreme network... Edge is 150-460 summit running 12.6 to 15.6 Core is 670 or 8900 MSM 128 running 15.4 - 15.6 Some support L2PT and some do not. I think what I need to do is build a counter pro...

X460-48p - Second PSU does not fit?

Hi, We are trying to figure this problem out with our supplier, but maybe some of you bumped in the same issue. Basically we have 2 x460-48p with the second PSU. Now, there is a tiny piece of metal that sticks out from the first psu to the second ...

How to configure two vlan in one switch to communicate without using the tagging port

Hi Guys, I want to know it is possible to configure two vlan in one switch to communicate without using the tagging port?

BD 8900-MSM128 console connection

Hi All, I am trying to access to 8900-MSM128 module using console port. This console port is COM not RJ45 port. I am using 2 adapters that shipped normally with switches from both sides (module side and my laptop side) I tried all the option using...

Top Kudoed Authors

User

Count

33

29

21

20

17

GTM-P2G8KFN