During a maintenance, after doing some changes on a stack configuration (stack composed of 2 x460 and one x440), we wanted to save the configuration on the primary so we've done the following command: The configuration file primary.cfg already exist...
I am sure that I have something configured wrong. This is my first Extreme switch. It is connected via a fiber connection to a trunked Cisco port (port 50 on my Extreme side). For hosts with static IP addresses, everything works fine. But for my DHC...
Hi, I need configure LACP protocol between Extreme and cisco. i have a BD-8810 SW i need configure two ports with LACP protocol but i dont have idea... the other equipment is a Cisco. i check in the command reference guide but that not say a lot
09/17/2015 02:04:11.84 Received an IGMPv3 query on VLAN NMS_VLAN configured for IGMPv2 from 192.168.11.13 09/17/2015 01:58:59.03 Received an IGMPv3 query on VLAN NMS_VLAN configured for IGMPv2 from 192.168.11.13 What does above log mean, Is there...
Hi everybody. I have two x670 switches which are MLAG peers. The ISC link between them is LAG actually. All "clients" connect to this switches with static LAG, but I have to connect one LACP client. Is it possible to use LACP MLAG with static LAG IS...
