ExtremeSwitching (EXOS/Switch Engine) - Page 679 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

ACL to Deny MDNS working?

Have created an ACL that is meant to be blocking MDNS multicast addresses and an additional address used my Microsoft. Have written the ACL to every port on Ingress so that I can see hits per port. Problem is I'm not seeing the counters incrementin...

Rate Limiting with Timer on Extreme

Hello Community, Have some of you configure Rate limiting with Timing on Extreme Networks Switches? We have a customer who is going to migrate from Cisco to Extreme , they are an ISP that use Rate Limiting with timing on their clients , they ...

flap ospf after add(delete) port to(from) sharing group

I use summit x670 with lacp 20g. After add(delete) port to(from) sharing group allways ospf flapping between two x670. Why? What to do? In the same time of L2 the traffic continues to work without stopping, flapping only osfp session. Please help....

Hitless Upgrade on BD8810

Good day all! I'm new to Extreme and reading the 15.4 EXOS Concepts Guide I had a question on Hitless Upgrades. I think I completely understand the steps/concepts of Hitless Upgrades except one mention in the documentation: "If you have a BlackDiamo...

Management Lost through console

Hello Community , I would like to know if some of you have ever experienced a problem when configuring through the console that sometimes it doesn't respond and you must reboot the switch in oder to have again the console CLI working. Do you ...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN