ExtremeSwitching (EXOS/Switch Engine) - Page 68 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

X695 SFP cage problems, will not release SFPs

Has anyone else noticed that on X695 (and probably VSP7400 as it’s the same hardware), SFPs can be impossible to remove? The same SFP can work with no problem in other switches but in X695, they are often stuck. Hopefully this is a problem with only ...

Resolved! STPD Edge Config on AP ports

Are there any issues with using STPD commands to setup an edge port with edge-safeguard and bpdu-restrict on an AP port? I am setting these commands on all the room side jacks but wondered if I need to skip the APs. Thanks.

Update firmware Multi EAPS ring

We have a multi EAPS ring. What is the best practise how to upgrade the swtiches to prevent to create a loop?

Summit X695 switch and 10 Gbps SFP+ modules.

Hello,We have a Summit X695, running ONIE-30.6.1.11-patch1-4 with 10 Gbps SFP+ modules in it. If we reboot this switch, then some of the ports do not come up after reboot. We must manually disable and then re-enable these ports to make them work.Ma...

Cant access to internet from switch

I'm new in Extreme Networks and trying to give internet access to switches. We have BD 8806 and Summit X440/ X480.All switches connected to same VLAN and don't have a access to internet. We don't have any policies with restrictions.And also when i'm...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN