ExtremeSwitching (EXOS/Switch Engine) - Page 702 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Slot-1: i2c-1: sylvester_plugincard_temp:3749 I/O failed,

I have a X670V-48t running 15.3.1.4 patch1-33 I am receiving the following warnings repeatedly in the log: 07/27/2015 11:19:31.20 Slot-1: i2c-1: sylvester_plugincard_temp:3749 I/O failed, addr 0x0048 rd/wr 1 cmd 0 proto 3, rc 145 07/27/2015 11:19...

Limiting inbound BGP routes

Hello, I'm multihomed with several upstream providers over two 480s and get full BGP routes from them. Both 480s are connected to two "core" 8806s that then connect to a bunch of 460s. The 8806s are the default routers for all of our customers' publ...

Monitoring ERPS

Hello extreme community I am building a new Extreme Ring with ERPS. Unfortunately there is no SNMP OID to monitor the ERPS-Status with our monitoring system (nagios). Is there a way to monitor the ERPS-Status (idle, init, protected ...)? Thanks a ...

OSPF export policy affecting Active BGP route

Hi All, So I'm working with a company who have two BGP peerings terminating on two edge switches. Long story short because of black hole routes we need to export both the default route and a /x into the network. That way if one uplink goes down, the ...

PoE issues Summit x460

Stack consists of the three Summit devices: two x460-48p & one x460-24p (#'s 1, 2 & 3 respectively) When I try to connect a POE device to the 2nd switch, there is no power except for 2 of the 48 ports. The other two switches in the stack are fine. T...

Top Kudoed Authors

User

Count

33

29

22

20

17

GTM-P2G8KFN