ExtremeSwitching (EXOS/Switch Engine) - Page 709 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

What happens every 60 seconds on a port with rate-limiting configured?

I've been doing some testing with rate limiting on an X440 in the lab. Fairly standard, boring, test setup. Ingress using a meter: configure meter rl_50meg committed-rate 50000 Kbps max-burst-size 50000 Kb out-actions drop Egress using rate-limit ...

SNMP - stack-ports and switch utilization

Hello, colleagues! Hav e 2 questions: 1. Is there possibility to monitoring recources utilization through SNMP? (like arp-table, routing table, fdb) 2. Is there possibility to monitoring productivity of stack-ports? In EXOS User Guide there is no MI...

MVRP deleting VLANs

Hello, colleagues! On swithces configured MVRP. VLANs adding normally. BUT When I delete VLAN on upstream switch, they don't removing from downstream switch. It's issue or normal behavior? Thank you!

XOS 15.7.1.4 mvrp between BD8806 and SUMMIT X460-G2-48t-10GE4

Hi, just testing mvrp between 3 SUMMIT X460-G2-48t-10GE4 configured as a stack and 1 BD8806 MSM-48c 10G8Xc The Summit X stack is connected to BD8806 via a 10GE port. On the BD8806: create vlan test configure test tag 500 configure vlan test add p...

Active/Active VRRP with Mlag

I have two BD 8810's. I have mlag and vrrp working well. It is currently in the standard active/backup. I have all my vlans on vrid 1 and the Virtual IP and the master are Core 1. We set the VIP to the IP of Core 1. My question is to get Active/Activ...

Top Kudoed Authors

User

Count

32

29

20

20

17

GTM-P2G8KFN