Hello guys! We are trying to monitor a BGP session in a SW extreme(X450). We use the command "snmpwalk" to validate the information regarding the OID of BGP, where it informs that there are 5 sessions. When we try to do a "snmpwalk" in a session mor...
06/16/2015 02:20:05.85 last message repeated 50 additional times 06/16/2015 02:19:44.35 vrrpInput: msgQSend error -1 errors are flodding in x-450 15.1 version switch. Why these errors are there?
hii techies... i have one black diamond 8810.. i wanna do trunking with cisco 3750 . please help. As in cisco i can juz creat a trunk port and give it a mgmt ip. viz switchport mode trun and switch trunk native vlan 100 and will give a ip to inter...
Hi everybody! I'd like to get some information about vlans on ports. Unfortunately, XOS doesn't respond to standard dot1qVLanStaticTable OID (.1.3.6.1.2.1.17.7.1.4.3). So, I've decided to use extremePortVlanInfoTable private OID. But I can't find ta...
Running XOS 15.6 on X770 and configured ACL to match on source-address and ACL matches, but the actions i tried e.g. "redirect" and "redirect-name" to change nexthop does not work but instead the switch continues to use the default routing table. Any...
