ExtremeSwitching (EXOS/Switch Engine) - Page 73 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! STPD Edge Config on AP ports

Are there any issues with using STPD commands to setup an edge port with edge-safeguard and bpdu-restrict on an AP port? I am setting these commands on all the room side jacks but wondered if I need to skip the APs. Thanks.

Update firmware Multi EAPS ring

We have a multi EAPS ring. What is the best practise how to upgrade the swtiches to prevent to create a loop?

Summit X695 switch and 10 Gbps SFP+ modules.

Hello,We have a Summit X695, running ONIE-30.6.1.11-patch1-4 with 10 Gbps SFP+ modules in it. If we reboot this switch, then some of the ports do not come up after reboot. We must manually disable and then re-enable these ports to make them work.Ma...

Cant access to internet from switch

I'm new in Extreme Networks and trying to give internet access to switches. We have BD 8806 and Summit X440/ X480.All switches connected to same VLAN and don't have a access to internet. We don't have any policies with restrictions.And also when i'm...

Disable DHCP for a VLAN

Hello,how to disable dhcp vlan through web interface?

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN