ExtremeSwitching (EXOS/Switch Engine) - Page 74 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! Connect a QSFP+ cable between a 5520-48W and a x770-32q

Hi,I am attempting to connect a 5520-48W to a x770-32q using a QSFP+ cable, but when it's connected, there's no link light and no sign of the link being up at either end. I believe I have enabled the right ports. On the 5520-48W, I am using one of ...

Resolved! Does the X435 support phyton scripting?

Hello,I have an X435 switch and try to run a phyton script according to https://extremeportal.force.com/ExtrArticleDetail?an=000079734&q=python%20script xxxx-SW1.8 # cat test.py print ("Script Start!") for number in range(1,11): print ("The numbe...

x435 mgmt interface going offline sporadically

Hello,We have an X435-24P-4S running Software Version: 31.2.1.1which was boarded via ExtremeCloud IQ and getting its IP address for the mgmt interface from a DHCP server.For no apparent reasons the mgmt interface goes offline for 8 hours, comes back,...

ezspanree excessive logging "debug cfgmgr show next"

Hi,Am using the ezspantree script to predominantly manage STP in a dynamic environment i.e. NAC is dynamically applying the VLAN based on the connecting end-system.Logs are predominantly filling up on the switch with the following messages:07/27/2022...

5420F and macmon

Dear community,we have one problem with our new Switches from Extreme an macmon nac. All of the new Switches doesn't show the correct 802.1X Status in macmon. They show "unauthorized" although they are authorized. It seems as if the 802.1X MAC Bypass...

Top Kudoed Authors

User

Count

28

26

19

18

17

GTM-P2G8KFN